Assmann waterproof D-Sub system is IP67 rated. These panel-mount connectors are available in solder cup as well as right angle and vertical PCB mount types. The cable-mount connector kit includes the connector, which has solder cup contacts. These connectors are available in 9, 15 and 25 positions in standard density and 15, 26 and 44 positions in high density. The recommended wire gauge for the solder cup connector is 22-26 AWG.
These panel-mount waterproof D-Subs are designed for rear-mount applications in panels that are up to 2.0mm thick. They come with two sets of jackscrews. One jackscrew set is 5mm long for panel thickness up to 1.2mm, and the other is 6mm long for panel thicknesses from 1.2mm, up to 2.0mm.
Cable mount D-Sub connector kits come with the back shell, seal, thumbscrews, and solder cup connector. They are also easy to install. Simply fit the cable through the back shell, terminate the wire to the solder cup contacts and hand tighten the cable nut on the rear of the back shell. The back shell will seal a particular range of cable diameters depending on the position count of the connector. Consult the datasheet for specific cable diameter ranges.
